NEW PSU APW3++ for Antminer S9 & L3+ in stock
1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
4. The shipping for this batch will start soon after 1st December 2017, depending on when the units are ready to ship out and your position in the order queue.
5. All items added to cart are shipped according to the item with the latest shipping date in the cart. If you would like to receive an item earlier, please place a separate order for it.
6. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.
Ripple & Noise
Setup, Rise Time
Power off Protection Trip Time
|Interface Type||5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)|
>0.95 (full load)
<1.5mA (220V 50Hz)
Output Short Circuit
-20°C – 50°C
20% – 90% relative humidity (non-condensing)
- Efficiency Test Curve Load versus temperature derating curve